男人的天堂啪啪

Displacement: 0.25...2 cm³ 
Outlet pressure: up 200 bar 
Speed: 750 …3500 rev/min 
Fluid temperature: -20 … +80 °C 
Working liquid: hydraulic oils 
Viscosity: 16 … 200 mm²/s 
Degree of filtration: 15-25µm

Displacement: 1...9.8 cm³ 
Outlet pressure: 250 bar 
Speed: 650 …3500 rev/min 
Fluid temperature: -20 … +80 °C 
Working liquid: hydraulic oils 
Viscosity: 20 … 200 mm²/s 
Degree of filtration: 25µm

Displacement: 4.5...36 cm³ 
Outlet pressure: 250 bar 
Speed: 650 …3500 rev/min 
Fluid temperature: -20 … +80 °C 
Working liquid: hydraulic oils 
Viscosity: 20 … 200 mm²/s 
Degree of filtration: 25µm

Displacement: 20...60 cm³ 
Outlet pressure: 250 bar 
Speed: 650 …2500 rev/min 
Fluid temperature: -20 … +80 °C 
Working liquid: hydraulic oils 
Viscosity: 20 … 200 mm²/s 
Degree of filtration: 25µm

The technical characteristics are in compliance with the pumps of 10, 20 and 30 groups. 
For more details, please see the catalogue.

The technical characteristics are determined by the compound gear pumps. 
For more details, please see the catalogue.

Available: 
Relief, Relief-Prefill, Unloading Relief, Pressure Reduction, Check, Flow Control, Dividing and Combining Valves 
Nominal bore: 6 , 10 mm 
Pressure control range: 5 … 100 bar 
15 ... 200 bar 
20 … 320 bar 
Rated flow: 10 ... 160 l/min 
Working temperature: -20 … +70 °C 
Working liquid: hydraulic oils 
Viscosity: 10 to 200 mm²/s 
Degree of filtration: 25µm

Available: 
Solenoid, Relief, Sequence, Needle, Manual, Pressure reduction Valves Operating pressure: 250 bars 
Internal leakage: 0.22 cc/min at 250 bars 
Fluid temperature: -20 … +90 °C 
Working liquid: hydraulic oils 
Viscosity: 10 … 800 mm²/s 
Degree of filtration: 25µm

El. Motors: 
AC 0.55...3 kW , mono or three-phase 
DC 0.8... 3 kW ; 12 or 24 V 
Tank volume: 1...60 l 
Pump displacement: 1...6,1 cm³ 
Wide range of modular elements allowing the implmentation of additional hydraulic schemes.

 El. Motors: 
DC 1... 3 kW ; 12 or 24 V 
Tank volume: 2...15 l 
Pump displacement: 1...6,1 cm3 
Working pressure: up to 250 bar 
Assembled with different valves depending on the hydraulic scheme.

El.motors 
AC - to 25 kw.; 1-3 pieces 
Mounting - vertical, horizontal, moved out; 
Capacity of the tank - to 500 L.; 
Displacement of the pump: 1-55 cm³ 
They are produced with a large variety of elements - accumulators,coolers and others for the realization of each concrete hydraulic sheme.

DC motor from all dimensions, coupled with gear pump - group 10 or group 20. 
Different modifications and variants for implementation of various decisions. 
More information You can find in our catalogue.

Displacement [cm3/rev.]         50 ÷ 315 
Maximum pressure [bar]        140 
Maximum oil flow [lpm]           25 ÷ 60 
Maximum speed [RPM]          600 
Maximum torque [daNm]        7.4 ÷ 30.5 
Minimum speed [RPM]           10 
Temperature range [°C]         -30 ÷ 90 
Viscosity range [mm2/s]         20 ÷ 75

Displacement [cm3/rev.] 50 ÷ 400 
Maximum pressure [bar] 175 
Maximum oil flow [lpm]  60 
Maximum speed [RPM] 1200 
Maximum torque [daNm] 9.4 ÷ 50 
Temperature range [°C] -30 ÷ 90 
Viscosity range [mm2/s] 20 ÷ 75

Rated powers     0.2-1 kW 
Rated voltages   12,24 V DC 
Rated speed     1500-3000 r.p.m 
Protection         IP44

Rated powers    1,5-2 kW 
Rated voltages  12,24 V DC 
Rated speed     2300-2700 r.p.m 
Protection         IP44

Rated power     3 kW 
Rated voltage   24 V DC 
Rated speed    3500 r.p.m 
Protection        IP44

Rated powers    5-10 kW 
Rated voltages  24 -80 V DC 
Rated speed     2400-2800 r.p.m 
Protection         IP21